30
BetterOutdoorProducts.com
Figure 55
3. Using a 7/16” wrench, remove the starter cable
Figure 56
.
Figure 56
4. Disconnect throttle cable (refer to Throttle/Choke
Cable Replacement).
5. Turn gas tank valve to Off position
Figure 57
.
Figure 57
6. Using a straight screwdriver, disconnect fuel line
from engine
Figure 58
.
Figure 58
7. Remove transaxle drive belt (refer to Transaxle
Drive Belt).
8. Remove clutch (refer to Clutch Replacement).
9. Using a 1/2” wrench and 1/2” socket, remove the
four bolts holding the engine to the power unit.
10. Lift engine slowly while turning it so the muffler
clears the heat shield (if equipped).
11. Install new engine in reverse order.
Hydro Drive Axles LH (10711), RH(10712)
1. Remove the Hydro Control Rods from Hydro Arms
Figure 59
.
Figure 59
2. Remove battery if equipped (refer to Battery
Replacement).
3. Remove hydro drive belt (refer to Hydro Drive Belt
Replacement). The belt does not need to be
completely removed from the machine, just off the
hydro pulleys. It can be pulled out the front of the
machine and left on the clutch.
4. Using a 1/2” socket, remove the Brake Latch
Figure
60
.
