29
BetterOutdoorProducts.com
9. Install new spindle in reverse order.
Spindle Pulley (10251) (10252) (10483)
1. See Spindle Replacement above.
2. 36 “ models have two single pulleys (10252) and
one double pulley (10251).
3. 44” models have two single pulleys (10252) and one
double pulley (10483).
4. 32” models have two pulleys (10650).
Idler Pulley Replacement (10027) Deck Idler
(10028) Deck Drive Idler
1. Remove belt guard cover (refer to Belt Guard
Cover).
2. Remove deck drive belt (refer to Deck Drive Belt).
3. Remove deck belt (refer to Deck Belt).
4. Using a 9/16” wrench and 9/16”socket, remove idler
pulley bolt
Figure 51
.
Figure 51
5. Install new pulley in reverse order.
Idler Spring Replacement (10029) Small
(10326) Large
1. Remove belt guard cover (refer to Belt Guard
Cover).
2. Remove deck drive belt (refer to Deck Drive Belt).
3. Remove deck belt (refer to Deck Belt).
4. Using 9/16” socket, remove spring retaining nut and
washer and remove spring
Figure 52
.
Figure 52
5. Using a 3/4” socket and wrench, remove idler arm
bolt
Figure 53
.
Figure 53
6. Replace spring and install in reverse order.
Note:
Grease idler arm after reinstalling.
Rear Wheel
1. Support the rear of the machine with a jack stand.
2. Using a 3/4” inch socket, remove the four lug nuts
holding the wheel in place.
Figure 54
.
Figure 54
3. Remove
rear
wheel.
4. Install new wheel in reverse order.
Note:
Be sure that lug nuts are tight.
Front Caster Wheel (10007)
1. Using two 1-1/8” wrenches, remove axle bolt and
remove wheel.
2. Install in reverse order.
Note:
When reinstalling
axle bolt place a small amount of (Blue) Loctite™
on threads. Make sure wheel turns freely.
Do Not
over tighten. Also, grease wheel bearings.
Engine
1. Remove battery if equipped (refer to Battery
Replacement).
2. Disconnect wiring harness from rear of engine
Figure 55
.
