Better Music Builder VM-92U G5 Operating Instructions Manual Download Page 2

Page: 2 / 32

CONTENTS

INTRODUCTION................................................................................ 1

SYSTEM FEATURES............................................................................. 1

PACKAGE ACCESSORIES................................................................... 2

2-in-1 BASE MODULE........................................................................ 3

•

Controls and Functions................................................................. 3~5

•

Hardware Setup............................................................................. 6~8

HANDHELD MICROPHONE............................................................... 9

•

Controls and Functions................................................................ 9~10

•

High Tech Auto-Mute System Features.......................................... 11

OPERATION............................................................................... 12~19

•

How to Select Frequencies for the Receiver................................. 12

•

How to Match Receiver’s Frequency with Microphone............. 13

•

How to Select Channel for the Receiver....................................... 14

•

How to Adjust Squelch.................................................................... 14

•

How to Insert/change Batteries of Microphone.......................... 15

•

How to Select Frequency of Microphone..................................... 16

•

How to Turn On/Off Microphone................................................. 16

•

How to Turn High Tech Auto-Mute On/Off................................. 17

•

How to Interchange Microphone Head....................................... 17

•

How to Select Microphone Signal Strength (5mW/10mW)...... 18

TECHNICAL SPECIFICATION............................................................ 19

BODY-PACK MICROPHONE (Optional)...................................... 20~21

TROUBLESHOOTING................................................................. 22~23

APPENDIX................................................................................. 24~26

WARRANTY..................................................................................... 27

CONTACT INFORMATION............................................................... 28

hand-held

Base Module

Features

Package

Spec

Appendix

Warranty

Troubleshooting

Body-Pack

Intro

Operation

Summary of Contents for VM-92U G5

































Search results

Summary of Contents for VM-92U G5

Reviews:

Related manuals for VM-92U G5

Brands by name

Popular brands

Better Music Builder VM-92U G5, Operating Instructions Manual

Search results

Summary of Contents for VM-92U G5

Reviews:

Related manuals for VM-92U G5

Brands by name

Popular brands