For more information on “How to Turn Auto-Mute ON/OFF” go to page 17.
NOTE
11
HIGH TECH AUTO-MUTE SYSTEM FEATURES
This function’s primary focus is to eliminate unwanted noise while being energy
efficient. To do so, the microphones are equipped with a six-axis gyroscope
sensor.
FEATURES:
1. Energy Saving
The six-axis gyroscope senses speed in three directions as well as any
angular changes in velocity. This information is transmitted through the sensor
and minimizes power consumption by entering a “sleep mode” when it
senses no movement within a preset time, allowing for more usage time
without changing batteries as often as conventional microphones.
2. Anti-Howl & Noise
To eliminate unwanted noise when the microphone is dropped, the six-axis
gyroscope sensor is used to detect a fast change in motion. The sensor
detects whether the motion is intended or not by the elapsed time it is falling.
When the time (in milliseconds) exceeds an estimated drop, the microphone
signal then cuts off momentarily; so at the point of impact the microphone is
no longer sending any signal to the receiver.
3. Instant “Wake up” Response
The microphone can switch from “sleep mode” to operating mode in
milliseconds with its intelligent sensory technology.
4. Auto-Mute When Not Held
The microphone detects and auto-mutes when it is dropping. This function
can avoid most unwanted noise and greatly decrease the chances of any
damage to the audio equipment. It is important to note the auto mute
function will engage once the sensor detects a falling motion (the minimum
falling distance for the sensor to activate is 12 inches/30 cm). The
microphone will operate normally again once it’s picked up.
Ground
UHF WIRELESS SYSTEM
VM-92U G5
10
mW
10
mW
MH
z
12 inches/30 cm
Summary of Contents for VM-92U G5
Page 31: ...29 MAINTENANCE NOTE ...
