5mW
10mW
MHz
5mW
10mW
MHz
10
LCD PANEL:
After turning on the “POWER”, the LCD screen will light up as below:
1. MICROPHONE SIGNAL STRENGTH:
5mW or 10mW.
The microphone signal strength “5mW/10mW” selection allows the
handheld microphone signal output to be standard at 5mW or strengthened
at 10mW. This feature can improve the audio quality and signal distance
that the handheld microphone can operate in. The standard signal distance
covers 80 feet (25 meters) at 5mW, while at 10mW the signal strength
improves but limits distance coverage to 40 feet (12.5 meters).
2. FREQUENCY:
Current value depends on your setting.
3. BATTERY STATUS:
Indicates battery life.
BATTERY STATUS:
Indicates full battery on the microphone.
Illustrates the battery status so you can see the
battery strength. A full battery display means
the microphone will last 4~6 hours.
If the microphone cannot turn on, please check the battery. It may be very low. Typical
new full battery life is 4~6 hours with our system, otherwise, the batteries might be defective or
near expiration date. Batteries are not covered under our product warranty.
NOTE
Low Battery
Full Battery
LCD screen will blink
constantly when battery is
extremely low and about
to die.
Indicates low battery on the microphone.
When the microphone LCD screen is blinking
or fading, it’s time to replace the batteries.
5mW
MHz
5mW
10mW
MHz
1
2
3
Summary of Contents for VM-92U G5
Page 31: ...29 MAINTENANCE NOTE ...
