Better Music Builder VM-92U G5, Operating Instructions Manual

Page: 14 / 32

12
OPERATION
HOW TO SELECT FREQUENCIES FOR THE RECEIVER
The 2-in-1 Base Module comes with two handheld microphones and the
microphones are preset with 100 frequency channels. The frequency can be
selected either automatically or manually.
1. AUTOMATIC FREQUENCY SELECT
STEP 1:
Press “SET” on the receiver and the “CH” will blink.
STEP 2: Press “UP/DOWN” until “SCAN” is blinking and press “SET”. The
receiver will search for the strongest frequency. Wait for “SCAN” to stop blinking.
2. MANUAL FREQUENCY SELECT
STEP 1:
Press “SET” on the receiver and the “CH” will blink.
STEP 2: Press “UP/DOWN” until “FRQ” is blinking and press “SET”. While the
frequnecy is blinking, press “UP/DOWN” to select the desired frequency. Wait
for frequency to stop blinking.
Operation
AF CH IR FRQ SCAN RF
MHZ
BAT
B
SQ GRP
UP
SET
DOWN
MIC 1
UP
SET
DOWN
MIC 1
UP
SET
DOWN
MIC 1
SQ GRP AF CH IR FRQ SCAN RF
MHZ
BAT
B
UP
SET
DOWN
MIC 1
UP
SET
DOWN
MIC 1
AF CH IR FRQ SCAN RF
MHZ
BAT
B
SQ GRP
UP
SET
DOWN
MIC 1
AF
CH IR FRQ SCAN
RF
MHZ
BAT
B
SQ GRP