User manual
BETSO WTCS-1
8.1.3
Display –
setting of displayed data during opened arm of the slate
Menu / Display settings / Display
This feature allows the user to specify which data will be displayed on the display of the
slate after the opening of the arm of the slate. There is the possibility to display the time
code or the user bits.
Timecode
after the opening of the arm of the slate it will be continuously
displayed time code
Userbits
after the opening of the arm of the slate it will be continuously
displayed user bits
8.1.4
TC hold
Menu / Display settings / TC hold
This feature allows the user to set the time during which there will be displayed time
code on the display of the slate after the clap.
0 frs … 60 s
time set in number of frames or seconds of time code
After a clap time code is always displayed first during "TC hold” time, and then
user bits are displayed during “UB hold" time.
8.1.5
UB hold
Menu / Display settings / TC hold
This feature allows the user to set the time during which there will be displayed user bits
on the display of the slate after the clap.
0 frs … 60 s
time set in number of frames or seconds of time code
9
©
Copyright BETSO ELECTRONICS s.r.o.
