User manual
BETSO WTCS-1
Disable
Auto on function is disabled
We recommend to set this option to „ JAM“. Then you can easily turn
on and JAM WTCS-1 to external TC source and avoid necessity to use standard
turning ON/OFF and jamming procedure.
8.4.5
Max. brightness after clap
Menu / Special / Max. brightness after clap
Max. brightness after clap function will increase the brightness of the display after the clap to
maximum value during displaying time code, user bits („TC hold“ + „UB hold“) and metadata.
On / Off
this feature can be enabled and disabled
Allows the user to save the energy of the batteries by setting the display
brightness to a lower value than would be necessary for a proper camera record
under the actual light conditions. Thanks to this feature the data displayed by the
slate after a clap will be always very well readable on the record made by camera
under any light conditions.
8.4.6
Board LEDs flash -
feature of flashing of smart arm LEDs
Menu / Special / Board LEDs flash
This function allows to set the condition, when smart arm LEDs are turned on for easy
synchronization.
00 frame
LEDs are turned on during each 00 frame of each second
Clap
LEDs are turned on only in frame in which clap of slate's arm occurred
00 frame + clap
LEDs are turned on in both conditions: during each 00 frame end after clap
Off
LEDs are never turned on
©
Copyright BETSO ELECTRONICS s.r.o.
18
