User manual
BETSO WTCS-1
8.2.5
Jamming -
setting of jamming to external TC source
Menu / Time code / Jamming
Once / Manual
WTCS-1 can be jammed once without asking and then user has
to confirm next jamming
Continuous
WTCS-1 will be jammed without asking every time new TC
source is inserted
Disable
Automatic jamming is disabled. Useful for forced master mode.
Jamming is still available upon request by button press
When jamming continuous option is selected and external TC source is
connected, every time measured TC offset exceeds 0.05 frames, WTCS-1 jams to
this new time code.
8.2.6
Cross jamming -
jamming WTCS-1 with different TC frame rate
Menu / Time code / Cross jamming
This function enables WTCS-1 to be jammed from external TC source preserving TC
frame rate set in TC frame rate option (chapter 8.2.1 ).
Enable
Cross jamming is enabled
Disable
Cross jamming is disabled
Example.
When WTCS-1 is set to 25 fps and TC source has 30 fps, WTCS-1
will be jammed to external TC time/frames, but will have the same frame rate as
set in TC frame rate, in this case 25 fps.
8.2.7
Jamming calibration -
calibration to TC source during jamming
Menu / Time code / Jamming calibration
©
Copyright BETSO ELECTRONICS s.r.o.
12
