Betonblock CL60, Operation Instructions Manual

Page: 14 / 16

Concrete Block Clamp – BETONBLOCK® ‐ 14
GEBRUIKSAANWIJZING
DETACHING
Make sure to check the stability while disconnecting the Concrete Block Clamp.
Position the Concrete Block Clamp on a flat surface.
Make sure to stick to the schedule below while disconnecting:
Fork ‐ lift truck:

Drive the Concrete Block Clamp to the preferred location;

Lower the Concrete Block Clamp onto the ground, or on big beams;

Turn off the engine;

Disconnect the lifting device;

Lift the lifting device;

Drive the truck with lifting device backwards.
Crane:

Move the Concrete Block Clamp to the preferred location;

Lower the Concrete Block Clamp onto the ground, or on big beams;

Disconnect the hook;

Lift the hook.
TRANSPORT ON TRAILER
During transport of the Concrete Block Clamp on a trailer, the Clamp needs to be fastened
properly. Make sure to take note of the total height of the trailer and its load.
Make sure to pay attention to the stability of the Concrete Block Clamp during
transport. Be attentive that the Clamp is properly fixed. Consider also the weight
of the Concrete Block Clamp.
5. MAINTENANCE
GENERAL
When replacements are needed, use only original parts at all times. Herefore, please contact the
manufacturer Betonblock.
During maintenance or cleaning duties, please lower the Concrete Block Clamp to
the ground first, switch off the engine and remove the ignition key.
Maintenance should only be performed by qualified mechanics only.