INSTALLATION AND COMMISSIONING
Installation
20
HR-Mini
Tank cleaning machine
Installing the HR-Mini
•
Fix the 2" collar (1) to the exterior
pipe (2) of the HR-Mini.
•
The closer the collar is positioned to
the motor of the HR-Mini, the better
the cleaning result.
•
Use the 2" collar to screw the HR-
Mini into the respective opening of
the tank being cleaned.
5.3.1
Water connection
WARNING
Risk of injury due to a high-pressure water jet!
When connecting the HR-Mini to a high-pressure device, the HR-Mini
is put into operation immediately. A jet of water is sprayed from the
HR-Mini at high pressure.
•
Connect the HR-Mini to the high-pressure device only after it has
been installed in the tank.
•
Always wear face protection when carrying out work on the HR-
Mini.
Water is connected to a high-pressure device using a standard connection fea-
turing an M22x1.5 external thread that corresponds to the parameters described
in section “3.3 Technical data”. The high-pressure device must have a fine 200
mesh screen filter.
