3
66
E
N
G
IN
E ASS
E
M
B
LY AN
D CO
NTRO
LS
EXPLODED VIEW OF SECONDARY UNIT
4) Thrust washer;
5) Circlip sw15;
7) Thrust washer;
10) Thrust washer 17x30x1;
11) First gear on secondary;
12) Roller cage 20x24x10;
13) Thrust washer 20x30x1;
14) Fifth gear on secondary;
15) Roller cage;
16) Third gear on secondary;
17) Fourth gear on secondary;
18) Sixth gear on secondary;
19) Second gear on secondary;
20) Secondary shaft
3.4.3 SECONDARY UNIT ASSEMBLY
Before proceeding with reassembly, clean all the
elements thoroughly and oil them with gear oil.
Always replace the circlips.
Clamp the secondary shaft
20
(using protective
jaws), so that the grooved end faces downwards.
Insert onto the lower cylinder part: the roller cage
15
, the 2nd gear (
19
) (so that the front claw clutches
face downwards), the 26x32x1.5 thrust washer
4
and the circlip
5
.
Insert the 6th gear (
18
) (so that the fork seat faces
upwards) and the circlip
5
.
Insert the 23x32x1.5 thrust washer
7
, the two roller
cages
15
, the 4th gear (
17
) (with the front claw
clutches facing upwards), the 3rd gear (
16
) (with
the front claw clutches facing downwards), the
23x32x1.5 thrust washer
7
and the circlip
5
.
Insert the 5th gear (
14
) (with the fork seat facing
downwards) the 20x30x1 thrust washer
13
the rol-
ler cage
12
, the 1st gear (
11
) (with the front claw
clutches facing upwards) and finally the 17x30x1
thrust washer
10
.
