3
74
E
N
G
IN
E ASS
E
M
B
LY AN
D CO
NTRO
LS
Allowed distance between shaft and pawl.
Complete drive shaft: 1) Movable pawl; 2) Gearshift
return spring; 3) Spring guide; 4) Spring; 5) Gearshift
drive shaft.
3.8
EXtERNAL GEARSHIft
Before reassembling the external gearshift, check
its state of use. While for the stop cam it is enou-
gh to make sure it’s free from abnormal wear or
meshing, the gearshift drive shaft needs more in-
depth inspections.
3.8.1 CHECKING THE COMPLETE
DRIVE SHAFT
With the device complete, make sure that the di-
stance between the movable pawl and the drive
shaft is between
0.35÷0.80mm
.
Should the distance be greater, replace the mova-
ble pawl.
In order to replace the movable pawl
1
, disassem-
ble the return spring of the gearshift
2
, the spring
guide
3
, the spring
4
(which must be compressed
and pulled out of its seat) and the pawl, moving it
completely towards the shaft
5
.
2
4
5
3
1
0,35÷0,80
