3
CHECKS AND MAINTENANCE
51
GB
To carry out the check, simply remove the
current cap and then unscrew the spark
plug using the spanner provided.
Carefully clean the electrodes using a
wire brush. Blow the spark plug with com-
pressed air to prevent any residues from
getting into the engine.
Measure the spark gap with a thickness
gauge. The gap should be 0.8÷0.9 mm.
If the gap is not as specifi ed, restore the
proper gap by bending the earth elec-
trode.
Check that the insulator is not cracked
and that the electrodes are not corroded,
in which case the spark plug should be
immediately replaced.
Conduct the check by referring to the table
on page 58.
Lubricate the spark plug thread, and then
(when the engine is cold) screw in the spark
plug by hand to its abutting end. Finally
tighten the spark plug with the spanner.
Note:
•
Always use NGK LKAR 8A-9 spark plugs.
Summary of Contents for 2011 RS
Page 1: ...RR 4T 201 2 350 400 450 498 ...
Page 69: ......
Page 75: ......
Page 76: ...6 TROUBLESHOOTING 75 GB CONTENTS CHARTER 6 TROUBLESHOOTING INDEX ...