1
GENERAL INFORMA
TION
15
GB
Current speed function (SPEED)
This data is always displayed on the right hand portion of the screen, along with
the “SPEED“ function indicator and the selected unit of measure. The unit of measure
(km/h or mph) is indicated with the appropriate symbol and can be modifi ed using
the methodology described farther ahead in this manual (see Setup Menu). If the
vehicle’s speed exceeds 110 km/h for more than 20 consecutive seconds, the
screen shown in the fi gure will be shown fl ashing on the display. At the same time,
the backlighting will also turn on and off intermittently.
This signal will remain on the screen until the vehicle’s speed goes below 110 km/h
for at least 10 consecutive seconds. Note: while the alarm and message is being
displayed, the buttons’ functionalities will be inhibited.
Odometer Function (ODO)
The data is displayed on the left hand portion of the screen, along with the “ODO”
function indicator. The total distance travelled by the vehicle is always calculated in
km. Nevertheless, the relative value can be displayed in either km or miles (see the
section regarding the Setup Menu).
H Function
This function describes the correct functionality/display of the H function. This fun-
ction indicates the vehicle’s total operating time in hours and can be displayed by
pressing the mode button. When selected, this data is always displayed on the left
hand portion of the screen. The data cannot be reset under the instrument’s normal
operating conditions. The data is displayed with a precision of 0.1 hours. In addition
to the basic functions, the user can also access the Setup Menu to enable others.
Summary of Contents for 2011 RS
Page 1: ...RR 4T 201 2 350 400 450 498 ...
Page 69: ......
Page 75: ......
Page 76: ...6 TROUBLESHOOTING 75 GB CONTENTS CHARTER 6 TROUBLESHOOTING INDEX ...