Bestway PRO-MOUNT 360, Operator'S Manual

Page: 33 / 91

D2
Adding and Mixing Chemicals
Although chemicals can be added directly to the main tank through the hinged tank lid, the
sprayer has been equipped with a chemical induction system for quick loading and thorough mix-
ing. To add and mix chemicals in the tank:
1. Fill main sprayer tank with desired amount of clean water.
2. Make sure agitator valve is fully open and that the pump supply valve is set to spray. There
is also an emergency shut off valve at the tank sump that must be fully open.
3. Activate tractor remote valve to engage the pump. Make certain that gauge on the front of
the sprayer indicates that the plumbing has been pressurized. Do not continue to operate the pump
is pressure is not indicated immediately.
4. Remove inductor lid. Measure out and add appropriate amount of chemical as prescribed by
the product label.
Inductor
Agitation Valve,
“off” position
Pump Supply Valve,
“Spray” position
Induction Valve,
“off” position
Pump Supply Valve,
“Induct” position