1.
Switch off the sand filter and set the
Control Valve to the Closed function.
2.
Close the connection valves.
3.
Remove the Strainer Cover by unscrewing
it.
4.
Take out the Strainer, remove any debris.
5.
Put the Strainer back into position. Ensure
the hole in the strainer is aligned.
6.
Ensure the Seal Ring is in place. Secure the Strainer
Cover back.
7.
Open the connection valves.
NOTE:
The Strainer must be emptied and cleaned
periodically. A dirty or blocked strainer will reduce the
performance of the sand filter.
CLEANING THE STRAINER
1.
Switch off the sand filter and set Control Valve to the Drain
function.
2.
Detach the Hose from the connection valve’s Port A and
sand filter Port A and attach to Port D.
3.
Switch on the sand filter to remove pool water.
WARNING: DO NOT DRY RUN THE SAND FILTER.
In areas that have freezing winter temperatures, pool equipment
must be winterized to protect against damage. Allowing water to
freeze will damage the sand filter and void warranty.
1.
Backwash the sand filter.
2.
Drain the pool according to the pool owner’s manual.
3.
Unscrew the drain valve cap at the bottom of the tank and
release the remaining water.
4.
Disconnect the two Hoses from the pool and the sand filter.
5.
Completely pour the sand out of the tank and dry all
components.
6.
Store the sand filter in a dry location out of child’s reach.
STORAGE
15
LOWERING OR DRAINING POOL WATER
