Sunrider
®
– Installation Instructions
Rev. D 1208
51719 pg. 9
Drape the fabric, inside out, over the tailgate, align-
ing the snap fl aps inside the rear opening with the
snaps on the Rear Bow. The center fl aps wrap un-
der to snap to the bow and the outside fl aps wrap
over to snap to the bow.
Drape fabric over
rear of vehicle
Outside
fl aps wrap
over to
snap
Inside fl aps wrap
under to snap
Snap Top Fabric to Rear Bow
Pull the deck up over the center bow to the
Windshield Header Assembly. Open the
Sun Roof and stand inside the vehicle to
access the front of the assembly. Wrap the
front edge of the Top Fabric around the front
edge of the Windshield Header Assembly.
Make sure that the fabric is centered on
the header. Press the plastic retainer along
the front of the top into the channel on the
header until it snaps into the channel.
Make sure the plastic retainers is
snapped fi rmly into the Header
channel. The Sun Roof feature will not
work properly if the retainer is not securely
installed.
Wrap Fabric around
Windshield Header and
snap plastic retainer into
channel in header
Secure Top Fabric to Windshield Header
Belt
Rail
Plastic
Strip
Fabric
Insert the plastic strips at the rear corners of the top
into the corners of the belt rails that are built into the
top edge of the vehicle.
Secure Top Fabric to Belt Rail
