Sunrider
®
– Installation Instructions
Rev. D 1208
51719 pg. 12
When operating the vehicle without the Quarter
Windows, the Rear Window should be removed for
proper ventilation.
Quarter Windows
To remove the Quarter Windows, unzip the zipper. Release the plastic strip
from the retainer. Release the Hook and Loop Fasteners from around the Door
Surround.
Rear Window
To remove the Rear Window, release the zipper around the curtain. Remove
the Tailgate Bar from the Tailgate Retainer Mounts and slide the Tailgate Bar off
of the bottom of the Rear Window.
Folding the Top Down
Remove the Quarter Windows. Set the Sleeves on the Windshield Header
Assembly over the Sun Roof Links to keep the deck rigid. Release the Spring
Pins on the Rear Door Surround Bracket to release the Side Bows. Release
the Windshield Latches. Open the tailgate and pull gently on the Rear Bow to
fold the top back down on the rear of the vehicle.
Adjusting the Top
Never Attempt to Open the Sun Roof While Driving
Operating the Sun Roof
The J-Clip Strap in the parts kit is to secure the fabric when the Sun roof is open.
To install the strap, orient it with the plastic J-Clip toward the front of the vehicle
and with the clip opening up. Wrap the long end of the strap over the top and
around the Center Bow and thread the end through the buckle sewn to the strap.
Threading Strap
through Buckle
Buckle
Strap
Install J-Clip
Strap on
Center Bow
