background image

Sunrider

®

 – Installation Instructions

Rev. D 1208

51719 pg. 5

Locate the Left and Right Door Surrounds, the Front 
Door Surround Brackets and the Left and Right Rear 
Door Surround Brackets in the parts kit.

Place the holes in the Front Door Surround Brackets 
over the front pair of holes on each Door Surround, 
farthest from the bend. Orient the brackets with the 
long tab toward the inside and with the threaded 
rivet up. Install the brackets using two #10 Phillips 
Head Self Tapping Screws and two #10 Star Wash-
ers for each bracket.

Orient the Rear Door Surround Brackets with the 
Spring Plunger toward the inside and to the front of 
the Door Surround. Align the holes in the brackets 
with the second pair of  holes in the Door Surrounds 
and install them using two #10 Phillips Head Self 
Tapping Screws, two #10 Star Washers and Loctite 
for each bracket.

Front

Toward 
Front

Door Surround

Rear Door 
Surround Bracket

Spring Plunger to inside 
and front of Door Surround

#10 Phillips Head Self Tapping Screws (apply 
Loctite to the threads) and #10 Star Washers

#10 Phillips Head Self Tapping 
Screws (apply Loctite to the 
threads) and #10 Star Washers

Front Door 
Surround Bracket

Door Surround

Door Surround - 
Driver’s Side Shown

Assemble Door Surrounds 
and Front and Rear Door 
Surround Brackets

Horizontal Support 
Bar

Knob

Rear Door Surround 
Bracket from Top

Door Surround

Rear Door 
Surround Bracket

Orient the Left and Right Door Surround Assem-
blies on the vehicle with the brackets toward the 
inside. Insert the nipples in the brackets into the 
holes in the bottom of the Horizontal Support Bar. 
Thread a Knob from the parts kit through the top 
of the Horizontal Support Bar and into each of 
the Door Surround Brackets. Close the door to 
check the seal and adjust the Front Door Surround 
Bracket if necessary for a good seal.

Knob

Detail of 
Knobs

Door Surround Bracket - 
Front or Rear

Horizontal 
Support Bar

Thread Knob 
into Bracket

Front Door Surround 
Bracket

Horizontal 
Support Bar

Door Surround

Front Door Surround 
Bracket from Bottom

Install Door Surround 
Assemblies

Summary of Contents for 51719















Reviews: