EZ Roll Tonneau Installation Instructions
Rev. A 0711
17182 pg. 6
Once the latch is disengaged on the driver’s side,
pull the Front Rail out of the passenger Side Rail
and lift the Cover out of the vehicle.
Remove Cover
If your vehicle is equipped with a Bed Liner that comes up over the front
bulkhead, you will need to trim the seal on the Tonneau Cover Assembly.
Mark the seal at each end of the of the Bed Liner and use scissors to trim
the bottom, “eyelash”, part of the seal at the mark.
Special Instructions –
Bed Liners
Only trim the bottom, “eyelash”, part of the seal.
If your vehicle is equipped with a Tailgate Cap, you
will need to trim the seal on the Tonneau Cover
Assembly. Mark the seal at each end of the of the
Tailgate Cap and use scissors to trim the bottom
part of the seal at the mark.
Special Instructions –
Tailgate Caps
Only trim the bottom part of the seal.
Seal
Bed Liner
Trim Seal
even with
Bed Liner
Seal
Tailgate Cap
Trim Seal even
with Tailgate Cap
Trim only “Eyelash”
Trim only “Eyelash”
