EZ Roll Tonneau Installation Instructions
Rev. A 0711
17182 pg. 2
Parts List
Place Side Rails on Bed
Locate the 2 side rails. Remove the protective tape
on the bottom of each rail and place the rail on the
bed on each side of the vehicle.
Once the rails are on the bed, align the front edge
of each Side Rail, with the inside edge of the front
bulkhead.
Tonneau Cover Assembly, Part
Number 471.16.17182, Qty - 1
Front Latch, Part
Number 471.15,
Qty - 2
Front End Cap, Part
Number 728325
Tonneau Cover Assembly Contains
Tie Down Straps, Part
Number 471.18, Qty - 2
Front Rail Assembly,
Part Number
471.22.65.125
Bow 1 Assembly,
Part Number
471.17.1.64.625
Bow 2 Assembly,
Part Number
471.17.2.64.625
Cover Fabric, Part
Number 85170B01
Bow 3 Assembly,
Part Number
471.17.3.64.625
Rear Rail Assembly,
Part Number
472.78.65.125
Rear End Cap, Part
Number 728330
Inner Clamp,
Part Number
728010, Qty - 6
Outer Clamp,
Part Number
728030, Qty - 6
5/16" Lock Washer,
Part Number 720236,
Qty - 6
5/16" Bolt, Part Number
726815, Qty - 6
Left Side Rail, Part
Number 471.21.64.812,
Qty - 1
Latch Assembly, Part
Number 471.14
Corner, Part
Number 728305
Corner, Part
Number 728300
Right Side Rail, Part
Number 471.20.64.812,
Qty - 1
Corner, Part
Number 728300
Corner, Part
Number 728305
Front of
Bed
Tailgate
Inside Edge
of Bed
Edge of Side Rail
must align with
Inside Edge of Bed
Rubber Pad, Part Number
720035, Qty - 6
Install Rubber Pads
on Outer Clamps
Peel the backing off Rubber Pads and press fi rmly
into place on bottom of Outer Clamps.
Outer
Clamp
Allen Wrench, Part
Number 726795,
Qty - 1
