BEST 510
1 — Unpack your UPS.
Although the packaging for your BEST 510 was designed specifically for
this unit and serves it well in protecting it from damage, you should
unpack the unit immediately and check for signs of concealed damage that
may have occurred in transit. Concealed damage is damage that may not be
apparent by the outside appearance of the packaging.
In case of damage, please notify the delivering carrier at once to examine
the goods, regardless of the external condition of the boxes. Under U.S.
Shipping Regulations, damage claims must be collected by the consignee.
Once your claim is established, damaged merchandise may be returned for
repair (see Page 26 for Return Policy). Do not return shipping-damaged
merchandise until after your claim has been established with the carrier.
Do not destroy packing material or boxes until the carrier's agent has
examined them. Save all packaging materials in case reshipment of
the UPS is required. Any damage sustained in transit when shipped
from the user, especially in an incorrect container, will not be covered
under warranty.
2 —
Locate the UPS near the equipment to be
protected.
Your UPS should be in a controlled environment. A controlled
environment is one that is indoor, temperature-controlled and free of
conductive or semi-conductive contaminants. The BEST 510 is intended
for indoor use
only
. There should be adequate ventilation and the location
should be free of dust and fumes. Do not install the unit next to open
windows where uncontrolled environmental conditions could affect the
unit.
Do not install the unit in any type of enclosure without first calling
BEST POWER Technical Support. The unit must have unrestricted air
flow. A 6” minimum clearance is required around the unit.
CAUTION
The environmental specifications shown in Table 2 on the next page
show the temperature and humidity limits of the UPS. Do not exceed
these limits.
INSTALLATION
Installation
4
