DOCSIS 1.0 Cable Modem User Guide Rev. 3.0 19
LAN
(PC)
•
Dark for no Ethernet carrier present or power off
•
Solid for Ethernet carrier present
•
Make sure your PC is ON and in working condition. Verify if your
network card is installed properly. Usually a light on the network card
indicates it’s working status. Consult with your Network card
Manufacturer or Best Data Technical support for help
TX
(DATA)
•
Dark for no user data going though the Cable
Modem or power off
•
Flashing for user data going through the Cable
Modem
•
If the above 3 LEDS are lit but you don’t see this LED flashing, please
verify that you have properly installed the TCP/IP drivers. Go back to the
installation section.
RX
(TEST)
•
Dark for initial self-test of the Cable Modem OK
or power off
•
Flashing for initial self-test of the Cable Modem
in progress or software down, or loading of the
Cable Modem in progress
•
Solid for self-test failure of the Cable Modem
•
If the above 3 LEDS are normal but RX LED does not blink, be sure that
your TCP/IP drivers are properly installed and your Internet browser is open
and functioning. This indicates the absence of downstream data transfer.
Consult with your cable provider and Best Data Technical Support for help.
Summary of Contents for CMX300
Page 1: ...Smart One DOCSIS Cable Modem User s Manual Model Number CMX300...
Page 2: ......
Page 8: ......
