1.
Install a 52" long x 2-1/2" wide board with
the angle end at the peak of the roof. Use
8d galv. nails.
4.
Install a 45" long x 2-1/2"
wide board.
2.
Install a 32" wide half circle trim board
over the bottom of the sunburst design.
5.
Install 2-1/2" wide trim
on the opposite side.
2.
Locate a 1x3x72" board, that has angle
cut on one end. Cut this board to fit and
install across the top of the side trim.
Step 22 Install Gable Trim
1.
Install (2) two 1x3x72" boards along each side
of the door opening, flush with the bottom edge
of the siding. Tack these boards with a couple
nails; you may want to adjust the trim later when
you install the doors. Use 8d galv. nails.
Step 23 Install Door Trim
