Step 13 Set Walls
1.
Secure wall panels together at the corners. Use (4) four 10d coated nails per corner. Nail
wall panels to wood floor. Nail through the bottom plate. Space 10d sinkers 24" apart.
2.
Locate 2x3-7' boards that were used to make shipping pallet. Install at door opening and
back wall panel to hold the walls straight. Use 2x4 blocks from truss jig to secure at bottom.
3.
Install the pre-built 59-1/2" door header between the front wall panels. Nail through the
wall stud, on the side panels, into the end of the header. Nail through the top wall plate
that extends over the door header. Use 10d sinkers.
4
Install 6-3/4" x 56-1/2" siding panels over the door header. The door trim will cover where
the siding butts together.
2x3-7' Support Board
2x3-7' Support Board
2x6' Door Header
Siding Panel
