Step 10 Set Walls Panels
1.
Erect wall panels. IMPORTANT make sure walls are plumb and square. Secure wall panels
together at the corners. Use (4) four 10d coated nails per corner.
2.
Nail along siding edge where it overlaps at corners. Nail through the bottom plate. Space 10d
sinkers 24" apart.
3.
Install the 67-1/2" door header between the sidewall panels. Nail through the wall stud into the
ends of the header. Toenail into the top wall plates.
4.
Install the 31-1/2" door header between the front wall panels.
5.
Remove the center (2) two 2x4-84" boards from pallet and temporarily install at both sides of
the door opening to hold the wall straight. Alternatively you can use 2x4-72" boards that will
be used later for tie plates.
2x4 Door Header
Sidewall Panels Without
Door Opening
67-1/2" Door Header
Sidewall Panels
Siding
Panel
Back Wall Panel
Front Wall Panels
Nail siding
