48" x 83-1/2"
Roof Sheathing Will
Extend Beyond Gable
36-1/2" x 83-1/2"
Step 23 Install Roof Sheathing
1.
Install roof sheathing per layout below. Starthing at rear of building install a 48"x72" OSB
roof panel flush with rear gable trim. Plumb each truss and make sure the sheets meet at center
of truss. Use 7d sinkers spaced 12" apart. The top row of roof sheathing will be about 1" below
the ridge to allow for optional ventilation. Important: Make sure the front gable is plumb and
the roof sheathing extends 7" past the siding on the face of the gable.
36-1/2" x 72"
48" x 72"
Step 24 Install Single Door Trim
1.
Locate (2) two 1x3-72" long trim boards. Tack
these boards, with a couple nails, flush to each
side of the door opening. You may want to
move the trim later when you install the doors.
Use 8d galv. nails.
1x3 Door Trim
