Air
Space
Truss
Shingles
Step 15 Install 1x4 Fascia
1.
Install 72" long 1x4 fascia trim over the
2x4 Truss Headers. Install 1x4 trim boards
flush with the bottom of the 2x4 and flush
with face of siding on the front gable.
2.
Install a 48" long 1x4 next.
3.
Cut a 74" long 1x4 to length and install
flush with the face of siding on the back
gable.
4.
Repeat to install 1x4 fascia on the opposite
side wall.
Step 16A Install Roof Sheathing
Detail 'B'
4' x 6'
Install roof sheathing with 7d sinkers, space nails
12" apart. When installing sheathing across the top,
insert a plyclip into the roof sheathing between each
truss. The top row of sheathing will be about 1"
below the ridge to allow for optional ridge venting.
1x4 Fascia Trim
1.
Install the first 4x6 roof sheathing panel against the
back of the siding. Note: Using a straight edge install
the top edge of the roof sheathing flush with the face
of the 1x4 fascia. See Detail 'B'.
2.
Install a 15" x 48" sheathing panel at the top.
3.
Continue to install sheathing per layout on next page.
4.
Repeat on opposite side.
Siding
Roof Sheathing
2x4 Truss
Header
Straight Edge
1x4 Fascia
See supplier of shingles to
purchase ridge venting.
Plyclip
15" x 48"
