Junction Box
Locate junction box and junction box bracket kit. Remove junction box cover and locate M5 X 10
PHCS. Use screws provided to attach junction box to mounting plate.
Use oval nuts (see orientation above) and screws provided to mount junction box to header.
Note! For bottom load application, use M5 X 10 PHCS to mount junction box directly to top of
header, no mounting plate is required.
Panic Breakaway Device (Required on all OHC inswing door packages)
Use hardware provided to mount panic breakaway device. ‘EXT’ and arrow should be pointing to
exterior of door package. Panic breakaway hook should be pressing against the exterior side of the
top rail. See electrical connection for panic breakaway device connection.
1009937-EI-1.0
Issue 2013-02-10
18
7 Part identification
