ADJUSTING THE HEIGHT
OF THE SHOULDER BELTS
1.
The correct belt height of the shoulder belts is attained when the belt disappears into the shell
slightly above the shoulder of the child. Ensure that the shoulder belts fit comfortably over the child’s
shoulder. (Fig.15)
2.
Loosen the shoulder belts by pressing the push button of the adjuster and pulling the shoulder belts
towards you as far as possible.
Important: Do not pull the belt pads when doing so. (Fig.9)
3.
Place the shell of the seat in the sleeping position.
4.
Remove the shoulder belts from the yoke. (Fig.16-А).
5.
Pull the shoulder belts through the shell and cover out of the belt pads, ensuring that the buckle
remains fixed to prevent the belts from twisting. (Fig.17)
6.
If you wish to alter the belts from or to the lowest positions, place the car seat in the sleeping
position.
7.
If you wish to alter the belts from or to higher positions, place the car seat in the sitting position.
8.
Place the shoulder pads at the desired height and thread the shoulder straps back through the
shoulder pads, cover and shell. (Fig.18)
9.
Connect the shoulder belts to the belt yoke. (Fig.19-А)
Fig.15
Fig.16
Fig.16-A
Fig.17
Fig.18
Fig.19
Fig.19-A
pull
Fig.20
