INSTALLING THE CAR SEAT
group I /9-18 kg/
The car seat “F1” can only be used with an automatic 3-point safety belt. (Fig.1) The car seat “F1” can
be used in five position (Fig.2): Pull the positioning handle under the front of the seat forwards or
backwards (feel the spring underneath), release the handle on your required position while hearing a
distinct click.
Fig.1
Fig.2
1.
Place the car seat in the sleeping position 3 or 4. (Fig. 3)
2.
Remove the installation shaft by pulling the moveable part of the lock from the car seat. (Fig.4-А)
3.
Pull and hold the shell forward, then thread the seat belt between the shell and the base, fasten the
seat belt with the seat buckle, and ensure the belt is not twisted. (Fig.5)
*Make sure the shoulder belt go from top of the seat and through the lock-off device (Fig.5-А) and the
lap belt go horizontally under the lap belt indicator (Fig.5-В) and joint with the shoulder belt and
buckle up the seat. (Fig.5-С)
4.
Return the shell to its original position, and thread the installation shaft into the hole and lock the
device by pushing the moveable part on the other side until hear a distinct click. (Fig.4-В)
5.
Adjust the shell to your child’s most comfortable position.
INSTALLATION
Fig.3
Fig.4
Fig.5
pull
pull
push
Fig.5-C
Fig.5-B
Fig.5-A
Fig.4-B
Fig.4-A
