Berthold 55393 BA2, Operating Manual

Page: 48 / 126

Quick Start LB 983 NightSHADE II Operating Manual
48
A prefix, the current year and month, the 3 digit sample ID counter as well as a suffix can be
specified if required. The resulting sample ID name can be seen under
“Result”
. The box
“Number of Identities to Create”
defines the amount of sample identities which will be creat-
ed. More ID´s can be added to the project later, if necessary.
To go to the next page select
.
On this page you can select the
“Acquisition Settings”
used for the project.
You can define a
“Pre Measurement”
and a
“Post Measurement”
template to be executed
before and after the measurement. Under
“Measurement”
select the application template used
to run the measurement.
To go to the next page select
.
The display ranges for the b/w photographic and colored signal (data) image can be defined on
this page
. If “ Use Default Setting”
is selected the system will calculate default values based on
the photograph and the measured data. Individual settings for the minimum and maximum val-
ues can be selected in the
“Use Custom Settings”
mode.
To go to the next page select
.