Remember if you need help contact Customer Care: 1+ (619) 449-2392
16|
Troubleshooting and Maintenance
Cleaning Your Fountain
In order to keep your Fountain in tip-top shape and for a prolonged life, it is best if your Fountain and the bowl or
water container that the Fountain is placed in are cleaned periodically. To clean your fountain, drain of all water
and disassemble. Use a mild soap and a soft cloth to clean the parts of your Fountain. DO NOT SCRUB YOUR
FOUNTAIN, AS THIS COULD CAUSE DAMAGE TO THE FINISH OF YOUR BERNINI™ FOUNTAIN.
After about six weeks of usage, you may want to clean the water pump’s impeller to keep your
Bernini™ Fountain in tip-top shape. You will need to drain your fountain of all water prior to clean-
ing the water pumps’ parts.
Cold Storage
Turn power off, remove from container, clean and dry the Fountain of all water. Remove the
batteries for long term storage and bring it indoors. (Now is a great time to clean the pump to
remove any debris that may have accumulated throughout the year).
The impeller inside of the water pump is what pushes water up through your fountain, allowing you
to enjoy the soothing sounds and wonderful sights of your Bernini™ Fountain. After long periods of
usage, this part will need to be cleaned to make sure your fountain runs optimally.
Begin by disconnecting
the pump from the
water tube.
Step 1:
Remove the
front of the water pump
by grabbing the sides of
the front panel and pull
it off the unit.
Step 2:
Remove the
impeller chamber cover.
This is tightly fitted on
to the impeller chamber,
but will come off.
Step 3:
Remove the im-
peller from its chamber.
Step 4:
Rinse the
impeller until all debris
has been removed.
Then replace the
impeller in the impeller
chamber, put the
impeller chamber back
on and then replace the
pump’s front panel.
Cleaning the Water Pump’s Parts
Water Pump Impeller
