Bernina B 580 Manual Download Page 23

Page: 23 / 194

Sewing preparation

Feed dog

«Feed dog»-button

flush with housing.

►

feed dog is ready to sew

Pulling, pushing or holding back the fabric will result in uneven stitches.

Let the fabric feed evenly.

With each stitch the feed dog moves forward by one step. The length of this

step is determined by the stitch length selected.

With an extremely short stitch length, the steps are also very short. The fabric

moves away from the foot quite slowly, even at full sewing speed. e.g. button-

holes, satin stitch and decorative stitches are all sewn with a very short stitch

length.

Feed dog lowered/ready to sew

Feed Dog and Fabric Feed

ATTENTION!

Pulling, pushing or holding back the fabric can result in dama-

ges of the needle and stitch plate.

«Feed dog»-button

pressed.

►

feed dog is lowered

For free-motion sewing (darning, embroidery, quilting, etc.).

033527.53.04_2014-07_Manual_B580_EN

Summary of Contents for B 580



































































































































































































Search results

Summary of Contents for B 580

Reviews:

Brands by name

Popular brands

Bernina B 580, Manual

Search results

Summary of Contents for B 580

Reviews:

Brands by name

Popular brands