Bernina B 580, Manual

Page: 117 / 194

116
Preparing for embroidery
Embroidery hoop
Center determination
█
determine the center of the material to be embroidered
█
mark the material with fabric marker or chalk
Using the embroidery hoop
█
loosen the screw 1 of the outer hoop if necessary
█
remove the inner hoop
Match the arrows 2 of both hoops.
The arrows are
̶ on the oval and medium hoop at the center front
̶ on the Mega Hoop (optional accessory) at the center front
̶ on the small hoop (optional accessory) to the right side
Embroidery template
̶ there is an embroidery template for each hoop
̶ the embroidery area is marked in 1cm squares
̶ the center and end point holes of the center lines are with holes
█
for transferring marks to the material
█
attach the embroidery template holder
█
place the template in the inner hoop, so the BERNINA logo is at the front
edge (by the arrows) and can be read
►
in this position the embroidery template clicks into the inner hoop
Hooping the material
█
place the material under the inner hoop
█
line up the marked center point on the center of the template
█
place the material and inner hoop on the outer hoop
Match the arrows of both hoops.
█
fit hoops into each other; ensure that the material does not
move
█
hoop the material to be embroidered tightly
█
tighten the screw
█
remove the template from the hoop by using the template holder
1
2
033527.53.04_2014-07_Manual_B580_EN