Bernina B 580, Manual

Page: 164 / 194

163
Troubleshooting
General Explanation Repair Messages
̶ Update successful
█
the sewing-/embroidery computer has been provided with the
latest software version
̶ The sewing computer must be
cleaned/lubricated
█
this notification will appear after approx. 180,000 stitches.
After cleaning/oiling clear the Display by touching . The
Display can be cleared temporarily by touching , but will
appear again when restarting the sewing computer. After
clearing with «ESC» for the third time, the cleaning
notification will only appear again after a further approx.
180,000 stitches
̶ It is time for the regular maintenance.
Please contact your BERNINA dealer
or your BERNINA service address
█
the sewing-/embroidery computer must be taken to an
authorised BERNINA dealer/servicing shop. The message
appears after approx. 2,000,000 stitches. Once the servicing
has been performed by an authorised BERNINA dealer/
servicing shop, the stitch counter is reset to «0» (zero) and
the message disappears.
The message can be deleted temporarily by touching the field
«ESC» but will reappear when the sewing-/embroidery
computer is next restarted. After the third deletion with the
message will not reappear until the next reminder at approx.
4,000,000 stitches (in total).
Having your sewing/embroidery computer cleaned and
serviced properly at the appropriate times ensures its proper
functioning and long service life. Failure to do so may
adversely affect service life and limit the guarantee. The
charge for servicing is nationally regulated – consult your
dealer or servicing shop for details
033527.53.04_2014-07_Manual_B580_EN