Bernina B 580, Manual

Page: 19 / 194

18
Sewing preparation
Changing the presser foot
Removing the presser foot
█
raise the needle and presser foot
█
turn power switch to «0» (off)
█
raise the clamping lever
█
remove the presser foot
Attaching the presser foot
█
guide the presser foot upwards over the cone
█
press the clamping lever down
Thread needle
█
raise the needle
█
lower the presser foot
█
turn power switch to «0» (off)
█
hold thread to the left and back
█
press lever A down and hold it
█
guide thread around the hook B to the right in front of the needle
█
put the thread from the front into the guide C until it catches in the wire
hook
C
█
release lever A
►
needle is threaded
█
pull the thread to the back and
█
put the thread under the foot and pull it from front to back over the thread
cutter on left side of the head frame D , cut
Threads release automatically as soon as the first stitch is sewn.
D
B
C
A
A
Position the needle by pressing the foot control once (1 stitch).
033527.53.04_2014-07_Manual_B580_EN