manualshive.com logo in svg

Bernina Artista 185, Manual

Share
Download
Bernina Artista 185 Manual Download Page 66

66

Setup Program

Save and close

· touch OK to confirm the change
· touch esc to return to the Setup

menu

· touch esc to return to the last

selected stitch menu

Back to basic settings

· follow the directions above to enter

the motor speed menu

· touch reset to revert to factory

settings

Changing the basic thread tension setting

The basic tension setting of the 

artista

machine applies to all stitches of the
machine. The tension is factory set for
best possible sewing results using a
100 weight, 2 ply polyester thread
(100/2). Other types and weights can
affect the stitch, causing a need for a
tension adjustment to get the best
results.

The overall tension setting of the
machine can be tightened or loosened
up to 20% in the Setup program. This
setting will remain in effect until it is
changed again, even if the machine is
turned off.

Changing the tension setting in the
Setup program will affect

all stitches

of the machine. Any secondary
changes using the TTC button (see
page 55) will be changed using the
basic setting as a base.

Note:

Basic setting refers to the over-

all tension setting of the machine.
This may be the factory setting or your
own if you have adjusted the tension
in the Setup program.

Setup menu

· press the external Setup button,

menu appears

· select Thread Tension
· thread tension screen appears

Altering the tensions

· the perfect stitch formation is

shown in the middle of the left side
of the screen

· the scale shows a possible change

of +/- 20%

· the basic value is indicated by a

fine line at 0

· a changed setting is indicated by a

black bar

· touch the arrows up or down to

alter the tension:
touch the up arrow if the stitch for-
mation looks like the top example

= need tighter upper thread
tension (the upper thread is
loose which allows it to be pulled 
further through to the underside
of the fabric)

touch the down arrow if the stitch
formation looks like the bottom
example 

= need looser upper thread
tension (the upper thread is tight
which pulls the lower thread 
further through to the top of the
fabric)

· touch OK
· the alterations are saved and the

screen closes

· the tension alteration affects 

all

stitches 

and remains saved when

the machine is turned off

➞

➞

185_BA_engl  16.4.2004  11:31 Uhr  Seite 66

 

030866.51.04_0401_a185_EN

Summary of Contents for Artista 185











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands