manualshive.com logo in svg

Bernina Artista 185, Manual

Share
Download
Bernina Artista 185 Manual Download Page 126

40

Practical and decorative stitches in memory

Practical and decorative stitches in memory

· the memory capacity is 1023 individual stitch patterns
· the memory has 255 banks
· each bank can be sub-divided as desired
· most practical and decorative stitches as well as letters

and numbers can be combined, programmed, and
saved in memory

· exceptions: buttonholes, eyelets
· all saved stitches remain in the memory when the

machine is turned off

· all saved stitches and combinations can be recalled at

any time

Programming practical and decorative stitches

· open the memory by pressing the external mem button
· touch mem 1 to access the memory storage screen
· select an empty memory bank
· touch OK to return to the previous screen
· select the desired stitch 
· the stitch appears in the memory bar
· select the next desired stitch
· continue in this manner until the desired combination

of stitches has been programmed

· to save, touch store

Example of programmed  stitch combination

· select a memory bank following the directions above
· touch stitch 407 one time
· touch stitch 102 one time
· touch stitch 711 one time
· begin stitching; the stitches will continuously alternate 
· to save, touch store

Examples of programmed  stitch with  function

· select a memory bank following the directions above
· touch stitch 413 one time
· activate mirror image – right/left
· touch stitch 413 one time
· begin stitching; the stitches will continuously alternate

facing up and down 

· to save, touch store

· select a memory bank following the directions above
· touch stitch 104 one time
· activate mirror image – right/left
· touch stitch 104 one time
· begin stitching; the stitches will continuously alternate

facing up and down 

· to save, touch store

185_NA_engl  16.4.2004  15:07 Uhr  Seite 42

 

030866.51.04_0401_a185_EN

Summary of Contents for Artista 185











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands