manualshive.com logo in svg

Bernina Artista 185, Manual

Share
Download
Bernina Artista 185 Manual Download Page 101

15

Long stitch

Straight stitch No. 1 or Triple Straight Stitch No. 6
size and type suitable for the fabric selected
cotton or polyester
3.5mm – 5mm
up (sewing position)
Reverse pattern foot No. 1C
Long stitch

Long stitch

· for all work where a longer stitch is desired
· for topstitching

Long stitch function

Stitch:

Needle:
Thread:

Stitch length:

Feed-dog:

Presser foot:

Function:

TIPS

Decorative top stitching 

· use cordonnet (topstitching) thread and a 100–110 

needle with the straight stitch

Basting

· long stitch can also be used to baste fine fabrics

☞

This function works with the straight stitch to produce a
longer than usual stitch. 

The machine sews every second stitch when the Long
stitch function is activated. The longest stitch possible is
10 mm when the stitch length is set at 5mm.

For decorative top stitching, the Long stitch function can
be combined with Triple Straight stitch.

185_NA_engl  16.4.2004  15:07 Uhr  Seite 17

 

030866.51.04_0401_a185_EN

Summary of Contents for Artista 185











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands