manualshive.com logo in svg

Bernina Artista 185, Manual

Share
Download
Bernina Artista 185 Manual Download Page 104

18

Universal stitch No. 15
depends on width of elastic
type and size to suit the fabric selected
cotton or polyester
up (sewing position)
Reverse pattern foot No. 1C 
or Embroidery foot No. 6 (optional accessory)

Sewing on elastic

· for gathering long lengths of fabric, frills and flounces

in fine fabrics

· works well for gathered sleeve edges and neck 

openings

Preparation

· cut elastic to length required

Sewing

· oversew the elastic, adjusting the stitch width to be

slightly wider than the elastic

· needle must not pierce the elastic
· after sewing,adjust the gathers evenly

Sewing on narrow elastic with Universal stitch

Secure the beginning and end of elastic

· sew a few straight stitches backward and forward to secure the elastic

Quick hem finish

· for children’s or doll clothing
· sew sleeve edges with elastic before sewing seams

Securing beginning and end

· sew a few stitches with the feed-dog lowered

Presser foot pressure

· increase the foot pressure, if necessary, for better

feeding of the fabric and cord

Gathering stitch No. 12
size and type to suit the fabric selected
cotton or polyester
up (sewing position)
Buttonhole foot No. 3C

Shirring elastic/cord

· for gathering long lengths of fabric

Preparation

· cut shirring elastic or cord double the length of the edge
· fold in half lengthways
· hook over the center toe on the buttonhole foot
· take both ends of the cord under the foot to the back

Sewing

· sew a few stitches
· lift the elastic or cord at the front and pull towards you
· leave ends behind the presser foot
· oversew cord without stitching into it
· after sewing, pull the cord to gather the fabric
· stretch elastic while sewing; the more it is stretched, the 

tighter the gathers

Sewing on shirring elastic/cord with Gathering stitch

Stitch:

Needle:
Thread:

Feed-dog:

Presser foot:

☞

Elastic, cord

Stitch:

Stitch width:

Needle:
Thread:

Feed-dog:

Presser foot:

TIPS

☞

TIPS

185_NA_engl  16.4.2004  15:07 Uhr  Seite 20

 

030866.51.04_0401_a185_EN

Summary of Contents for Artista 185











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands