Mastering
Your
BERNINA
®
BERNINA
®
Embroidery
Module/Machine
M
ASTERING
Y
OUR
BERNINA
®
E
MBROIDERY
M
ODULE
/M
ACHINE
11
©2005 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA
®
Dealers
Adjusting Embroidery Hoop
(
artista
only)
• This process calibrates the needle to the center of the hoop
• Only necessary once, as applies to all hoop sizes
artista
200E
Make sure the module is properly
attached to machine.
Touch the external Setup button.
Select the Embroidery Settings
option.
Insert embroidery template into
the large hoop and attach hoop
to module.
Touch “Check”; the hoop position
will be read and the hoop will
stop with needle positioned over
center marking of hoop template.
If the needle is not positioned
directly over the center, use the
positioning arrows to make
adjustments.
Touch OK; the hoop setting is
now saved and you may touch
Esc to leave this menu as well
as the Setup menu.
artista
165E & 185E
Make sure the module is properly
attached to machine.
Touch the external Setup button.
Select the Service option; select
Adjustment of Hoop.
Insert embroidery template into
the large hoop and attach hoop
to module.
Touch “Check”; the hoop position
will be read and the hoop will stop
with needle positioned over center
marking of hoop template.
If needle is not positioned directly
over the center, use positioning
arrows to make adjustments.
Touch OK to close screen;
the hoop setting is now saved .
Touch Esc to leave Setup menu.
Notes
