Connecting the embroidery module
Attaching the module to the sewing computer
6
Attaching the module to the sewing computer
· turn the sewing computer off
· remove the accessory box from the sewing computer
· place the module on the sewing computer behind the
free arm
· push the module from the left towards the sewing
computer so that the connecting lugs engage in the
base plate
Connecting the cable
· insert the plug into the socket on the right hand side of
the sewing computer, flat side to the front
Release the cable
· hold the cable with the black plug
· open the connection cover on the end of the plug
· pull the plug out
Removing the module
· grip the back right corner to lift the module and
remove to the left
Note:
Always separate the module and sewing computer for
transportation. Never transport them attached.
The embroidery module should only be attached or
disconnected when the sewing computer is turned off.
Release the cable
· the cable connects the module to the sewing computer
· pull the cable out of the holder on the back of the
module
Store the cable on the module
· insert the cable into both cable holders
· press cable gently to secure
Attention:
When connecting the embriodery module
and/or the free-arm adapter, attention must be paid
that all items are on a flat and even surface!
165_170_180_SM_engl 19.04.2004 8:58 Uhr Seite 6
008904.55.04_EMB_0401_a165 a170 a180_EN
