3
Safety Instruction
11. Switch the machine off (”O”) when making any adjustments in the needle area, such as
threading or changing the needle, threading the bobbin, or changing the presser foot, and
the like.
12. Always unplug the machine when performing cleaning or maintenance work such as
replacing the sewing light or when making any other user maintenance adjustments men-
tioned in the instruction manual (disconnect the power plug). Cleaning and maintenance
work must not be carried out by children without supervision.
13. Never drop or insert any object into any openings.
14. Use this machine only in dry and protected areas. Never operate the machine in a damp
or wet environment.
15. Do not operate the machine where aerosol spray products are being used or where oxy-
gen is being administered.
16. To disconnect, turn the power switch to (”O”)(off), then remove the plug from the outlet.
Do not unplug by pulling the cord, instead grasp the plug to pull it from the outlet.
17. If the supply cord of the foot control is damaged, it must be replaced by the manufacturer
or an appropriate service agent or a similar qualified person in order to avoid endanger-
ment.
18. Never place anything on the foot control.
19. When replacing the light bulb, always use the same type.
20. The machine may only be used in combination with a foot control of the type C-9000.
21. The sound pressure level during normal operation is lower than 75dB(A).
22. This machine is provided with double insulation (except U.S.A/Canada). Use only identical
replacement parts. See instructions for Servicing of double-insulated products.
SERVICING OF DOUBLEINSULATED PRODUCTS
In a double-insulated product, two systems of insulation are provided instead of grounding. No
grounding means is provided on a double-insulated product nor should a means for grounding
be added to the product. Servicing a doubleinsulated product requires extreme care and
knowledge of the system and should only be done by qualified service personnel. Replace-
ment parts for a double-insulated product must be identical to those parts in the product. A
double insulated product is marked with the words ”DOUBLE INSULATION” or ”DOUBLE
INSULATED”.
The symbol may also be marked on the product.
