26
Embroidery Selection
Starting to embroider
After the preparations are done, you can start embroidering.
Select the embroidery thread according to the information
shown on the display.
When using pure .exp designs from the internet you may find
the color information in their document.
•
Prepare the embroidery thread, thread the needle and
attach the embroidery foot.
•
Lead the thread through the embroidery foot hole, and
hold it lightly in your left hand.
If the thread is pulled too tightly, the needle may break or
bend.
Do not allow anything to hit the arm while embroidering. The
design might become distorted.
•
Lower the presser foot
A
ttention
!
n
ote
Before pressing the Start/Stop button, press OK button and
then the arrow buttons can be used to move the first stitch
to desired position.
This is especially used with border embroidering.
•
Press Start/Stop button to start embroidering.
•
After sewing 5 to 6 stitches, press the Start/Stop but-
ton again to stop the machine.
