16
Tear-away stabilizers
•
Excess is easily torn away.
•
One or more layers can be used.
•
Available in different weights.
•
For more stability, apply to the wrong side of the mate-
rial with temporary adhesive spray before hooping.
•
Carefully tear away excess stabilizer from the back of
the embroidery after stitching.
•
Designs are not skewed.
•
Stabilizer will remain under larger embroidered areas.
Application
–
For all woven materials and materials without
stretch.
Stabilizer
Embroidery Setup
Attaching the embroidery hoop
Removing the embroidery hoop
•
Raise the presser foot.
•
Place the embroidery hoop under the presser foot.
•
Attach the embroidery hoop, plug the embroidery hoop
connector into the hoop securing lever from the front to
the back until it clicks.
•
Raise the presser foot.
•
Press the snap on the embroidery hoop holder down.
•
Pull the hoop towards you smoothly and carefully.
