UM - CODE N1 N2 N3 N9 - REV 0.3
EN
GLI
S
H
Reassembling the slice deflector
1. Place the slice deflector carefully
in its place as shown in the picture.
Reassembling the blade cover
1. Replace the blade cover as
shown in the picture making sure
the square section joint is in its
proper place;
2. Insert the tension rod for
locking and screw completely.
29
6.2.5. Reassembling the slicing
machine
Reassembling the sharpener
1. Insert the sharpener beginning
from a position of 45° and turning it
till that one shown in the picture
and then push it downwards until it
stops at its correct position.
