Page 9 of 39
BERINGER Middle East FZC
Fujairah Free Zone Phase III
Fujairah, U. A. E
Phone: +971 9 277 48 51
Homepage:
E-Mail: [email protected]
2.9
Tipping device
3
SET UP AND OPERATION
3.1
Set up
BE AWARE!
Please read the following safety instructions and the ones in chapter 1 before set
up and obey to those!
1.
The bearing capacity of the ground at reducer’s location has to be at least 17.00 N/m³.
2.
The
reducer is not appropriate for operation in explosive areas. (e.g. chemical plants).
3.
At reducer’s location has to be enough space for transport with a chain-loader-truck.
4. If the compactor is filled from a ramp or a platform, the height of the feed opening has to be at
least 1,10 meters above the ramp.
5. The ground has to be solid and levelled to avoid bracing of the reducer.
6. Provide enough light at
reducer’s location.
7. The location should be protected against unauthorized access.
8. The electricity supply at location has to be protected with a fault current circuit breaker (F1 switch),
sensitive trigger of max. 30 mA and fuse protection min. 16 A delay
.
The feed cable has to have a lateral
cut of min. 4 x 2,5 mm² copper, 400 V 50 Hz, electricity network: TN
– C – S, CEE plug, 16 A , fuse
protection with 3-pole breaker performance 3 x 16 A, characteristic C/D connected upstream with a fault
current circuit switch with max. 0,03 A release current.
9. For flexible supply cables a heavy rubber hose pipe HO/RN-F VDE 0100 has to be used.
BE AWARE!
Ensure that the cleanout
door is closed and locked,
before starting the
pressing cycle.