USER MANUAL 2.2 | B-EASYCONNECT
Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen |
26
7
Service and maintenance
The device may only be serviced and repaired by the manufacturer.
7.1 Maintenance
The device is maintenance-free when used as intended.
NOTE
Unregulated, unpredictable operation!
Failure or malfunction can lead to an uncontrolled and unpredictable operating sequence. Do
not plug, connect, disconnect or touch any connections during operation. Before working on the
device, switch off or disconnect all power supplies, including those of connected peripherals
(controller, programming devices, etc.).
Do not open the device. If it is necessary to work inside the device, contact customer service
7.2 Cleaning the device
Clean surfaces only with a dry or slightly damp, lint-free cloth.
NOTE
Damage to the equipment!
The housing is made of plastic and must not be exposed to mechanical or chemical stresses.
Protect the operating equipment from excessive moisture and wetness. Do not use high-pressure
cleaners or steam cleaners. Do not use corrosive cleaning agents, thinners, abrasive cleaners or
hard objects. Do not apply excessive pressure and do not bend or twist operating equipment. Do
not place heavy, hard or sharp-edged objects on the device.
